Car Paint Correction Techniques
Car paint correction is a must when you are restoring an older vehicle to its former glory. The imperfections in the finish, whether it be a few pebbles in the finish or uneven color areas, can be very difficult to cover up. It is also very difficult to make the imperfections disappear without painting over them. While some imperfections can be worked around by using thin layers of paint, many others need to be tackled with paint correction. You can remove the imperfections with sanding, but this leaves the rest of the finish dull and without any of the natural beauty of a freshly painted finish.
Here Is What You Should Do For Your Car Paint Correction Techniques
There are several different techniques that can be used for car paint correction. The most effective technique for correcting a dull, lackluster or distorted finish is a two stage process, the first of which smooths the surface and then the second gives it a rich, vibrant sheen. The process begins with a sanding of the work surface to remove any rough edges and then a high-pressure wash is applied to the area. After allowing the pressure to dry for about fifteen minutes, the finish is then buffed with fine-grit paper to bring out and even the most pronounced irregularities.
One of the best ways to use this method for car paint correction is with a quality automotive paint sprayer that allows you to apply a light coat of wax while the finish is still wet. The wax helps protect the metal and prevent it from rusting while it protects the paint. With this method you can apply a clear coat of wax while the finish is still damp and gently buff the finish to bring out all the natural color of the metal. After buffing, the metal should be left to dry for another fifteen minutes before finishing with a light layer of clear lacquer to seal the surface. This process can be repeated as necessary until your vehicle has the sheen and shine that you want.